Goya Sails Custom Masts are designed for the highest level of competition and for the pure pleasure of simply riding. Goya RDM Custom Series Masts are the perfect match for your Goya sails and boards, and they are guaranteed to deliver maximum performance and durability.

Our top of the line quality has been achieved by combining the best materials and construction, and by developing an advanced mast shape, engineered for superior reflex and strength.

Construction process: Wrapping system guarantees a consistent bend in all our masts.

Material: Full pre-preg carbon/fiber construction.

Constant joint bend: The shoulder and ferrule are fused together during the construction of the base, reducing weight and maintaining a continuous mast bend throughout the joint.

Carbon content: 75%

Keeping it simple, custom performance with no compromises.

All mast tops and bases are interchangeable, allowing riders to custom tune their sails and achieve their preferred bending curve percentages. For example, you might feel that a 5.3 sail is too soft and lacking in power on a 400 mast, and that it is also too stiff and powerful on a 430. With the Goya RDM Series you can get the best of both masts by using the stiffer bottom section from our 430 mast, to give stability in the power zone around the boom area, in combination with the top section from our 400 mast, to add lightness and a softer feel.

Why use RDM "skinny" masts?

High Durability/Low Weight: It is very simple. A reduced diameter paired with increased wall thickness allows us to make our masts resistant to breakage through bending or impact, while at the same time making them lighter than traditional, wide-diameter masts.

Bending Curves & Reflex: Because we make the mast wall thicker on the bottom section (the section that breaks most often), the bottom bend is naturally more rigid, giving our masts the extra stability always needed at the boom area and keeping the power zone free of unnecessary wrinkles. Our mast top sections maintain a more traditional diameter, keeping the wall thickness to a minimum. This translates into more reflex at the top part of your sail, letting you ride closer to the wind.

Speed: It is no secret that a thinner leading edge creates a faster profile. Goya RDM masts have the same small diameter that has been used to break the world speed sailing record. Our fin designs also utilize this "leading edge" principle, giving us excellent results below the water as well.